Filter
Top Products
page 3.3
Digital Projection LIGHTNING 35HD User Manual 3. Getting started
Notes
Whenever you switch the lamp
on, the projector will reset
momentarily, whilst the lamp
strikes. This is to protect the
control circuitry from the effects
of the lamp strike pulse.
Any settings made before you
switched the lamp on will be
retained.
For more detailed information
about all the touch screen
menus, see the next section:
Using the menus.
Switching the lamp on
• Press the LAMP button on the Main menu..
• Press the LAMP ON button.
The projector will reset momentarily, whilst the lamp strikes. You will not be able
to make any further settings until the Main Menu returns.
Adjusting the lamp power
Either:
• Touch and drag the red slider up and down
OR
• for fine adjustment, press either arrow head.