Kodak 560 Projector User Manual


 
Warning
Warning
IMPORTANT: BEFORE OPENING THE BOX CONTAINING THE
XENON BULB, NOTE THE FOLLOWING PRECAUTIONS: The
Xenon bulb contains gas under pressure. Care should be taken in
handling the bulb to avoid injury.
Wear protective clothing such as gloves, long-sleeved shirt, face
and eye covering to protect against flying glass in the event of bulb
breakage.
Handle the bulb only by the ends. Natural skin oils from hands
may damage the quartz envelope.
Always allow the bulb to cool before handling.
When necessary, clean the bulb with ordinary rubbing alcohol
(only when the bulb is cool).
Place the bulb on a soft, secure surface away from table edges.
Never operate the bulb with the lamp cover off. Do not permit
light from the bulb to fall directly on skin or clothing. The Light
from the Xenon bulb is rich in ultraviolet rays similar to direct sun
rays. This could burn the skin and bleach clothing. Do not look
at the bulb directly while it is on. The light emerging from the
projector lens is safe as long as common sense is exercised.
If you have any questions regarding the installation of the Xenon
lamp, please call Navitar at 1-800-828-6778.