Filter
Top Products
Forward/Reverse Transfer Switch
Located on the rear part of the projector, it moves the slide tray forward
and reverse.
Power Connector
Connects the main power cable.
Zero-point Indicator
When lit, it indicates that the slide tray is at the zero-position.
Adjustable Screw Legs
The projected image can be positioned on screen by adjusting the four
legs on the projector base. (Legs should be adjusted as far in as possible
when shipping to avoid damage.)
Slide Gate
Loads each slide into the projector from the slide tray.
Projection Lens
A wide variety of Navitar slide projection lenses are available for use with
your Xenon projector. A large diameter lens, such as those offered by
Navitar, will allow you to output more light from the Xenon projectors
lamp house. Conversely, using a low cost, plastic slide lens of a smaller
optical diameter may prevent you from achieving maximum brightness
on-screen.
Auto Focus Switch
Turns the automatic focusing of slides on/off.
Features
7