Filter
Top Products
The dissolve interface receives signals from an AVL/Dataton Dissolve
Controller and controls three (3) 560DM/750DM Series Xenon Slide
Projectors.
Component Description Quantity Weight
MDC200 12.7W x 13.2D x 3.7H 1 each 17 lbs.
324W x 335D x 94H (mm) (7 Kg.)
Connection Cord Length 9 3 each
Power Cord Length 16 1 each
Power Supply 115V 50/60HZ standard (220V available,
to be specified when order is placed)
Power Consumption 120VA
Ambient Temperature 5-35ºC
Use Continuous use possible
Dimensions 12W x 13.2D x 3.7H
(324mmW x 335mmD x 94mmH)
Weight 15 lbs.
Color Black
Power Switch
The main power switch for this unit. When the switch is turned on, the
internal lamp lights.
Set-Up Switch
Turn the three set-up switches to the ON position (switch is pushed in)
and the shutter of the dissolve module on the 560DM/750DM Xenon
Slide Projector will open. This will be useful for adjusting pictures on
the screen before the slide show. When the show is ready to start, turn
the three set-up switches to the OFF position. When the switch is
turned on, or when the SHUTTER OPEN signal is sent from a dissolve
controller, the LED is lit in this switch.
General
Components
Specifications
Features
Navitar Dissolve Interface MDC200
35
Set-up Switch(3)
Power Switch
NAVITAR MDC 200
SET UP
OFF
ON
POWER
C
B
A