Filter
Top Products
Printer Overview
4 www.kodak.com/go/aiosupport
Configuring printer settings
NOTE: When you first power on the printer, the LCD prompts you to select the
Language and Country/Region.
To set or change basic printer settings:
1. Press Home.
2. Press to select Printer Settings, then press OK.
3. Press to select one of the following settings:
• Date and Time
–Press OK, then press to select Ye a r , Month, Day, Hour, or Minute.
Press or to change the values; press OK when you are done.
NOTE: You can also synchronize the printer date and time to your computer using
the Home Center Software.
• Button Sounds
–Press to select Loud, Off, or Soft.
• Time to Lo w Power
To conserve energy, your printer will enter a low power (sleep) mode after
being idle for a default delay time of 1 hour. You can increase the delay time to
low power (in 0.5 hour increments) up to 4 hours. Increasing the delay time
may result in reduced energy savings.
–Press to change the time to energy-saving sleep mode (select from 1 to
4 hours in 0.5 hour increments).
• Tag ged I ma ge Pr in ting (see Printing tagged pictures, page 37)
–Press to select Off or On.
• Language
–Press OK, press to select a language, then press OK.
• Country/Region
–Press OK, press to select a country or region, then press OK.
• Reset All Settings (see Resetting factory defaults, page 76)
NOTE: Resetting factory defaults does not change the date and time, language,
country/region, or network settings.
4. Press Back to return to the Main Menu.