Filter
Top Products
Copying
46 www.kodak.com/go/aiosupport
Changing the number of copies of a photograph
To change the number of copies:
1. Place the original photograph face down on the scanner glass.
2. Press Home.
3. Press to select Copy Photo, then press OK.
4. Make sure Quantity is selected.
5. Press or to select a number, or use the numeric keypad to enter the
number of copies.
6. Press Start Black to make black-and-white copies, or press Start Color to make
color copies.
Enlarging or reducing a photograph
To enlarge or reduce the size of the copy:
1. Place the original photograph face down on the scanner glass.
2. Press Home.
3. Press to select Copy Photo, then press OK.
4. Press to select Copy Size.
5. Press or to select the copy size.
NOTE: If you select a copy size larger than 5 x 7 in. / 13 x 18 cm, press to select
Tray Selection, then press to select Bottom Tray. Make sure that the paper
in the bottom tray is the size and type (plain paper, photo paper, etc.) that
you want.
6. Press Start Black to make a black-and-white copy, or press Start Color to make a
color copy.
Darkening or lightening a copy of a photograph
To darken or lighten the copy of the photograph:
1. Place the original photograph face down on the scanner glass.
2. Press Home.
3. Press to select Copy Photo, then press OK.
4. Press to select Brightness.
5. Press to select a number below zero for a darker copy, or press to select a
number above zero for a lighter copy.
6. Press Start Black to make a black-and-white copy, or press Start Color to make a
color copy.