Filter
Top Products
www.kodak.com/go/aiosupport 13
KODAK ESP 9200 Series All-in-One Printer
If your printer is connected to a computer with MAC OS:
1. Unplug the USB cable from your printer and computer.
2. On the printer control panel, press Home.
3. Press to select Network Settings, then press OK.
4. Press to select View Network Configuration, press OK, then confirm you have
an IP address.
5. Select Apple > System Preferences.
6. Under Hardware, select Print & Fax.
7. In the Print & Fax dialog box, click +.
8. Select your printer from the list, then click Add.
The printer with a wireless connection is listed as the name of the printer plus a
number (for example, KodakESP9200+0069).
Changing from USB to an Ethernet connection
Before you connect, you need:
• An Ethernet network that includes a router, switch, or hub with an Ethernet port.
• A Category 5 (or higher) Ethernet cable.
• To temporarily disable your firewall until the printer is successfully installed and
communicating. For information, go to www.kodak.com/go/inkjetnetworking.
To change from a USB connection to an Ethernet network connection:
1. Unplug the USB cable from your printer and computer.
2. Connect the Ethernet cable to the Ethernet port on the back of the printer.
3. Connect the other end of the Ethernet cable to an available Ethernet port on
your router, switch, or hub.