Filter
Top Products
Setting up the Projector
15
Connecting to a Video Player
If your video player uses a round, one-prong composite video
connector, you’ll only need the audio cable, audio adapter, and
composite video cable that shipped with the projector.
If your video player uses a round, four-prong S-video connector,
you’ll need an S-video cable in addition to the audio cable and audio
adapter. The S-video cable is sold separately.
Note: Your video player may have a "Video Out" connector for a
coaxial cable connection. Do not use this to connect to the
projector.
To connect to a video player:
1. Plug the composite video cable yellow connector into the
“video-out” connector on your video player. This connector may
be labeled “To Monitor.”
• If you’re using an S-video cable, connect it to the
“S-video out” connector on the video player.
2. Plug the other yellow connector into the composite video
connector on the back of the projector.
• If you’re using S-video, plug the other end of the cable into
the “S-video” connector on the projector.
audio adaptor
audio cable
composite
video cable
Connecting with
composite
video cable