Filter
Top Products
User’s Guide KODAK DP2000 Digital Projector
30
Vertical position
Note: The Vert. Position option is available only for computer
sources. The projector sets this option automatically for a
video source.
Follow these steps to manually adjust the vertical position.
1. Turn Auto Image off.
2. Highlight Vertical position, then press the left navigation button
to move the image down or press the right navigation button to
move the image up.
Positioning adjustments are saved when you power off the projector.
Controls Menu
Video Standard
When Video standard is set to Auto, the projector attempts to pick the
video standard (NTSC, NTSC 4.43, PAL, PAL-M, PAL-N, or
SECAM) automatically based on the input signal it receives. (The
video standard options may vary depending on your region of the
world.) If the projector is unable to detect the correct standard, the
colors might not look right or the image might appear “torn.” If this
happens, manually select a standard by clicking either the left or right
navigation button and cycling through the standards.
Note: If you already know the video standard used in your
geographical area, it’s best to manually select it.