Filter
Top Products
Using the Projector
27
Tint
The tint adjusts the red-green color balance in the projected image.
Changing the Tint setting has no effect on PAL or SECAM video
sources.
• Press the left navigation button on the keypad to increase
the amount of green in the image.
• Press the right navigation button on the keypad to increase
the amount of red in the image.
Color
The color setting adjusts a video image from black and white to fully
saturated color.
• Press the left mouse button to decrease the amount of color
in the image.
• Press the right mouse button to increase the amount of
color in the image.
Blank Screen
Blank Screen determines what color is displayed when there is no
active source and when the projector is in standby. Click the left or
right navigation button to toggle between blue and black.
Reset All
Click the left or right navigation button to reset all the options (except
Language, Video Standard, Rear Projection, and Standby Time) in all
the menus to their original settings.
Audio Menu
Volume
Note: Changing the volume from the menu is the same as changing
it using the keypad.
• Press the left navigation button to decrease the volume.
• Press the right navigation button to increase the volume.
Volume adjustments you make are saved for each source.