Filter
Top Products
User’s Guide KODAK DP2000 Digital Projector
44
Problem: Image and menus are reversed left to
right
• Rear projection mode is probably turned on. Turn Rear
Projection off in the Controls menu. The image should
immediately return to forward projection. See “Rear
Projection” on page 31.
Problem: the projector displays vertical lines,
“bleeding” or spots
• Adjust the brightness. See “Brightness” on page 26.
• Check the projection lens to see if it needs cleaning.
Problem: no sound
• Adjust the volume.
• Verify the audio/input connections.
• Adjust the audio source.
Problem: Image is “noisy” or streaked
Try these steps in this order.
1. Deactivate the screen saver on your computer.
2. Turn
Auto Image off and then back on again. See “Auto Image” on
page 28.
3. Turn
Auto Image off and adjust the synchronization and tracking
manually to find an optimal setting. See “Manual Sync” on
page 29 and “Manual Tracking” on page 29.
• The problem could be with your computer’s video card. If
possible, connect a different computer.