Filter
Top Products
Using the Projector
31
Standby Time
This option lets you select how long the lamp stays on and how long
the blank screen is displayed in standby mode before the projector
turns off. Select among 1, 5, 10, and 15 minutes and 1 and 2 hours by
clicking the left or right navigation button and cycling through the
options.
Rear Projection
When you turn
Rear Projection on, the projector reverses the image so
you can project from behind a translucent screen. Highlight Rear
Projection, then click the left or right navigation button to turn this
feature on and off.
Default Source
Default Source toggles between Computer and Video. This
determines which source the projector checks first for active video
during power-up. Highlight Default Source and click the left or right
navigation button to toggle between the options.
Auto Source Select
This setting toggles between On and Off. When this feature is Off, the
projector defaults to the source selected in Default Source. To display
another source, you must manually select one by pressing the
button on the keypad or the or button on the remote control.
When this feature is On, the projector automatically finds the active
source, checking the default source first. Highlight Auto Source
Select and click the left or right navigation button to turn this feature
on and off.