Filter
Top Products
User’s Guide KODAK DP2000 Digital Projector
32
Plug and Play
This setting toggles between On and Off. When it is On, most new
computers will automatically recognize the projector, then set the
monitor resolution and refresh rate accordingly. You need to set the
Plug and Play setting to Off for the projector to display properly on
some older computers. The Plug and Play setting does not affect
video images.
If the projector’s display constantly changes between the computer
image and the message, “Perfecting the image”, you may need to set
Plug and Play to Off.
Display Messages
This setting toggles between On and Off. When this feature is On,
status messages such as “No signal detected” or “Standby Active”
appear in the lower-right corner of the screen. Click the left or right
navigation button to turn this feature off and not see status messages.
Display Startup Screen
This setting toggles between On and Off. When this feature is On, the
KODAK startup screen appears when the projector starts up and
remains until an active source is detected. The startup screen contains
information on contacting Kodak. Click the left or right navigation
button to turn this feature off and display a plain black or blue screen
instead of the startup screen.