Filter
Top Products
Configuration Menu Overview
25
MACHINE SETTING Menu
" Manufacturer’s default settings appear in bold.
1 AUTO PANEL
RESET
Setting
ON / OFF
Select whether or not all settings in the control panel
return to their default settings when no operation is
performed for a set length of time.
If
ON is selected, select from 0.5, 1, 2, 3, 4, and 5
(units: minutes; default:
1) for the length of time until
the auto panel reset operation is performed.
If
OFF is selected, the auto panel reset operation is not
performed.
2 ENERGY SAVE
MODE
Setting
5 / 15 / 30 / 60
Enters Energy Save mode in order to conserve energy
when no operation is performed. Specify the length of
time in minutes until the machine enters Energy Save
mode.
3 LCD
CONTRAST
Setting
LIGHT DARK
Specify the brightness of the message window.
4 LANGUAGE
Setting
ENGLISH / FRENCH / GERMAN /
ITALIAN / SPANISH / PORTUGUESE
/
RUSSIAN / CZECH / SLOVAKIAN /
HUNGARIAN / POLISH / JAPANESE
Select the language of the menus and messages that
appear in the message window.
5 LAMP OFF
TIME
Setting
MODE1 / MODE2
Select the length of time until the scanner unit lamp
goes off when no operation is performed.
If MODE1 is selected, the lamp goes off when the
machine enters Energy Save mode.
If
MODE2 is selected, the lamp goes off 10 minutes
after the machine enters Energy Save mode.
6 BUZZER VOL-
UME
Setting
HIGH / LOW / OFF
Select the volume of the sound produced when a key
is pressed and of the alarm that is sounded when an
error occurs.