Konica Minolta C280 Fax Machine User Manual


 
bizhub C360/C280/C220 4-3
4.1 To begin operation
4
Network settings
An IP address must be assigned to the machine and settings, such as the SMTP server, must be specified in
order to use the machine on the network. For the detailed procedure, refer to the [User's Guide Network Ad-
ministrator].
Specifying an E-mail address for this machine
An E-mail address must be registered to this machine to send scanned data via E-mail or to use the Internet
Fax function. This E-mail address is used for sending/receiving data. It is recommended that the E-mail ad-
dress registered for the administrator be used.
If the E-mail address registered for the administrator is not specified, the sender's E-mail address must be
entered for each Scan to E-mail operation. Note that Scan to E-mail operations are not possible if a From
address is not entered.
Reference
- If User Authentication is enabled, the E-mail address specified for each user will be From address.
d Reference
For details on setting the E-mail address for this machine, refer to the [User's Guide Network Administrator].
4.1.3 Connection of modular cable
To send/receive G3 fax that use the telephone line, connect the modular cable to this machine. To use the
G3 fax function, the optional Fax Kit FK-502 must be installed onto the machine. To use two telephone lines,
one more optional Fax Kit FK-502 must be installed onto the machine. In this case, two modular cables must
be connected.
Connect one end of the modular cable to the telephone adapter, and the other end to the predetermined con-
nector of this machine. For details on the connector location, refer to the [User's Guide Copy Operations].