Filter
Top Products
2
Setup items by operation
2-94 bizhub C203/C253/C353
For NetWare 5.x/6 Novell Distributed Print Service (NDPS)
0 Before specifying settings for NDPS, check that the NDPS broker and NDPS manager have been
created and loaded.
0 Also, check that the TCP/IP protocol is specified in the NetWare server, the IP address is specified for
this machine, then this machine is running.
1 Log in to NetWare as an administrator from a client computer.
2 Start up NWadmin.
3 Right -click "Organization" or "Organizational unit" container where a printer agent is created.
4 Select "NDPS Printer" on the "Create" submenu.
5 In the "NDPS Printer Name" box, enter the "printer name".
6 In the "Printer Agent Source" column, select "Create a New Printer Agent", and then click "Create".
7 Check the printer agent name.
8 In the "NDPS Manager Name" box, browse through the NDPS manager names.
9 Register the printer agent name.
10 In "Gateway Types", select "Novell Printer Gateway", and then register it.
11 In the "Configure Novell DPS for Printer Agent" window, select "(None)" for the printer type and "Novell
Port Handler" for the port handler type.
12 Register the settings.
13 In "Connection type", select "Remote (LPR on IP)".
14 Register the connection type.
15 Enter the IP address set for this machine as the host address.
16 Enter "Print" as the printer name.
17 Click the "Finish" button to register the settings.
The printer driver registration screen appears.
18 Select "None" for each operating system to complete the registration.