Filter
Top Products
4
Appendix
4-10 bizhub C203/C253/C353
Property Attribute information
When using a printer driver, various functions can be specified in the file properties.
In the file properties, you can check the attribute information of the file.
Protocol The rules that allow computers to communicate with other computers or peripheral
devices
Proxy server A server that is installed to act as an intermediary connection between each client
and different servers to effectively ensure security over the entire system for Internet
connections.
PServer A printer server module under a NetWare environment.
Monitors, changes, pauses, restarts, or cancels a print job.
Queue name Name specified to each device that allows printing when network printing.
Quick memory transmission This is the method to start sending a fax transmission by scanning one page of the
document at the same time. Even in a case of multiple documents, this function can
be used to send the document without straining the memory capability.
RAW port number The TCP port number used when the RAW protocol is selected for Windows TCP
printing. Usually set to 9100.
realm (IPP setting) Region for performing security functions. This organizes authentication information
such as the user name and password, and defines the security rules in the region.
Receiving This is the condition where the fax machine answers the call.
Redial This is a function for dialing a fax number again after waiting for a specified length of
time, such as when the recipient’s line is busy.
You can select either to redial manually or to redial automatically the number.
Reference Allowed Level A feature for specifying settings so that only certain people are able to view certain
destination information for the purpose information security. When synchronized with
user authentication, only information with an access permission level matching that
specified for the user can be viewed.
Referral setting (LDAP setting) If there is no corresponding data on the LDAP server searched for the destination,
specify which LDAP server should be searched next or specify an LDAP server.
Specify whether or not the multifunctional product searches this specified LDAP
server.
Relay broadcast This is a function to send the broadcast the fax via other fax (called as a relay distri-
bution station). When there are multiple broadcast destinations at distant places, one
of the broadcast destination is specified to the relay station and the entire amount of
the communication charges can be reduced by doing the relay transmission from the
relaying station.
Relay distribution station A feature to broadcast the fax to the relay distribution destination by receiving the re-
lay request from the relay instruction station. The relay distribution function is not
available in this machine.
Relay instruction station The fax machine that sends the relay broadcast request.
Remote RX A function to issue a directive for receiving a call via an external phone, using a re-
mote reception number.
Resending This function retries sending specific documents stored in the memory, which were
not successful sent, to either the same destination or another destination.
Resolution Displays the ability to reproduce the details of images and print matter correctly.
RIP Abbreviation for Raster Image Processor. Process that develops picture images from
described text data using the PostScript page description language. The processor
is usually integrated in the printer.
RGB Abbreviation for Red, Green, and Blue.
Represents all colors by changing the brightness ratio of the three RGB colors using
the primary colors used by the color representation in a monitor.
Samba UNIX server software that uses SMB (Server Message Block) so that UNIX system
resources can be used from a Windows environment.
Scan size This is a function to specify the scanning size of a document and transmitting it. If the
width of the paper in the recipient’s fax machine is smaller than that of the transmit-
ted document, the fax is normally reduced when it is printed. If you do not wish to
reduce the fax, specify a document size that is same as the size of the paper in the
recipient’s fax machine in order to send the fax at its original size.
Scanning When the scanning operation is carried out, an image is read with the row of image
sensors that gradually move. The direction that the image sensors are moved is
called the main scanning direction, and the direction in which the image sensors are
arranged is called the sub-scanning direction.
Screen font A font for displaying text and symbols on a CRT monitor.
Term Description