Filter
Top Products
Connecting a VP-128H Matrix Switcher
9
5.3 Connecting the VP-128H (also RC-1616) via the 10 Base T network
port
To connect the VP-128H (also the RC-1616) via the 10 Base T port, do the
following:
Connect the VP-128H 10 Base T port to the VP-128H 10 Base T port to
the RC-1616 10 Base T port, when not using a hub, via a crossover cable with
RJ-45 connectors, as Table 4 and Figure 5 define
Table 4: Crossover Cable RJ-45 PINOUT
EIA /TIA 568A
Side 2
EIA /TIA 568B
Side 1
PIN Wire Color PIN Wire Color
1 Green / White 1 Orange / White
2 Green 2 Orange
3 Orange / White 3 Green / White
4 Blue 4 Blue
5 Blue / White 5 Blue / White
6 Orange 6 Green
7 Brown / White 7 Brown / White
8 Brown 8 Brown
Pair 1 4 and 5 Pair 1 4 and 5
Pair 2 3 and 6 Pair 2 1 and 2
Pair 3 1 and 2 Pair 3 3 and 6
Pair 4 7 and 8
Pair 4 7 and 8
Figure 5: RJ-45 PINOUT
If connecting the VP-128H / RC-1616 10 Base T port to the 10 Base T
network port on a network hub (for example, to connect multiple RC-1616
panels to one VP-128H) use a straight-through cable with RJ-45 connectors,
as Table 5 defines
Table 5: Straight-through Cable RJ-45 PINOUT
EIA /TIA 568A
Side 2
EIA /TIA 568B
Side 1
PIN Wire Color PIN Wire Color
1 Orange / White 1 Orange / White
2 Orange 2 Orange
3 Green / White 3 Green / White
4 Blue 4 Blue
5 Blue / White 5 Blue / White
6 Green 6 Green
7 Brown / White 7 Brown / White
8 Brown
8 Brown