Kramer Electronics VP-81SIDN Switch User Manual


 
#
Feature
Function
12
LOCAL AUDIO
INPUTS
DVI
Connect to the local DVI audio source
13
HDMI
Connect to the local HDMI audio source
14
HDMI OUT Connector
Connect to the local HDMI acceptor
15
AUDIO
OUTPUTS
+LG+R
Connect to the balanced audio acceptor (see Section 6.1)
16
R
Connect to the unbalanced audio acceptor right channel
17
L
Connect to the unbalanced audio acceptor left channel
18
S/PDIF
Connect to the digital audio acceptor
19
PROG TERM DIP-Switch
DIP-Switch 1: Sets the RS-485 bus termination (see Section 8.3).
Up = Off, Down = On (Default = On)
DIP-Switch 2: For the use of Kramer service personnel only
20
RS-485 3-way Terminal Block
Connect to RS-485 port on a remote controller or another VP-81SIDN.
Connect: G to Ground, A to A, and B to B (see Section 6.4)
21
RESET Button
Press while power-cycling the device to reset parameters to factory default values
22
REMOTE IR 3.5mm Mini Jack
Connect to an external IR receiver unit for controlling the device via an IR remote
controller (see Section 3.3)
8
VP-81SIDN
Defining the
VP-81SIDN 8x1 Digital Step
-In Switcher