Kramer Electronics VP-81SIDN Switch User Manual


 
VP-81SIDN - Configuring and Maintaining the VP-81SIDN
23
8 Configuring and Maintaining the VP-81SIDN
This section describes:
Setting the RS-485 device number (see Section 8.1)
Reading the current RS-485 device number (see Section 8.2)
Setting the RS-485 bus termination (see Section 8.2)
Resetting to the factory default settings (see Section 8.4)
Upgrading the firmware (see Section 8.5)
8.1 Setting the RS-485 Device Number
The machine number on the RS-485 bus can be set to between 1 and 4 and can
be set using the front panel buttons.
To set the RS-485 machine number using the front panel buttons:
1. Press the Lock button until the button lights.
The front panel buttons are locked.
2. Press the Local Input Select HDMI and Mute buttons at the same time.
The TP Input Select buttons flash.
3. Press the TP Input Select button number (1 to 4) for the required machine
number.
The TP Input Select buttons stop flashing and the selected TP Input Select
button lights.
4. Press the Lock button until the button is no longer lit.
The selected machine number is set and front panel buttons are unlocked.
8.2 Reading the Current RS-485 Device Number
To read the current RS-485 machine number:
1. Press the Lock button until the button lights.
The front panel buttons are locked.