Kramer Electronics VP-81SIDN Switch User Manual


 
VP-81SIDN - Operating the VP-81SIDN Remotely
29
9.1.1 Authorized Users
By default, you are logged in as User and you can:
Select an active input or output
Adjust or mute/unmute the output volume
Change the device name
Modify the IP configuration
Options that you are not authorized to perform are grayed out.
When logged in as Admin, in addition to the User abilities, you can:
Modify the input priorities (see Section 9.1.9)
Modify the input/output button characteristics (see Section 9.1.10)
Upgrade the device firmware (see Section 9.1.11)
Reset the device (see Section 9.1.12)
Change the User and Admin Passwords (see Section 9.1.12)
Enable/disable IR control
Note: Any actions that you are not authorized to perform are grayed out.
9.1.2 The Step-In Software Menu Bar
The following table describes the Menu Bar options.
Menu Bar
Options
Sub Menu
Description
FILE
Connect/Disconnect
Connect or disconnect to the device
Exit
Exit the Step-in software
DEVICE
Details
Retrieve and display the device details, such as, model,
unit name, version, and so on
Change Admin Password
Change the Admin password
Cascade
Select the number of cascaded devices
Firmware Update
Update the device firmware using a new firmware file
(Admin only)
Change Unit Password
Change the Admin user password (Admin only)
Reset
Power cycle the device (Admin only)
IR Status
Enable or disable the IR control for the device
ABOUT
NA
Displays the Step-in Software and Kramer company
details