Filter
Top Products
If You Cannot Make Copies As You Want
157
3
If You Cannot Make Copies As You Want
General
Adjust Image
Problem Cause Action
Copiesarenotstapled. Therearejammedstaples
in the stapler.
Remove jammed staples. ⇒ p.175
“
e
Removing Jammed Staples”
Note
❒ After removing jammed staples,
staples might not be ejected the
first few times you try to use the
stapler.
The number of copies exceeds
the capacity of the stapler.
Check the stapler capacity. ⇒ p.51
“Staple”
Copy paper is curled. Turn the copy paper over in the
tray.
Staples are wrongly posi-
tioned.
Originals are not set cor-
rectly.
Check the correct position to place
the originals. ⇒ p.51 “Staple”
Misfeeds occur frequently. Copy paper size setting is
not correct.
Set the proper paper size. ⇒ p.170
“Changing the Paper Size”
You cannot combine sever-
al functions.
Selected functions cannot
be used together.
⇒ p.152 “Combination Chart”
When sorting, the pages
are divided into two
blocks.
The memory became full in
themiddleofsortingand
the pages were delivered in
two blocks.
You can interrupt copying when the
memory becomes full. ⇒ "Memory
Full Auto Scan Restart" on p.204
“Input/Output”
Problem Cause Action
In Double Copies mode, parts
of the original image are not
copied.
Combination of original and
copy paper is not correct.
Select A3
L
for A4
K
origi-
nals and A4 for A5 originals.
⇒ p.116 “Double Copies”
In Border, Center, or Cent-
er/Border mode, parts of the
original image are not copied.
You set a wide erased margin. Make the margin width nar-
rower. You can adjust it be-
tween 2-99mm. ⇒ "Erase
Border Width" and "Erase Cent-
er Width" on p.194 “Edit
1
/
2
”
Set the originals correctly.
Originals are not scanned cor-
rectly.
In Margin Adjustment mode,
parts of the original image are
not copied.
You set a wide erased margin. Set a narrower margin with
the User Tools. ⇒ "Front Mar-
gin: Left/Right" and "Back
Margin: Left/Right" on p.194
“Edit
1
/
2
”
There is a lack of margin space
ontheoppositesideofthe
binding position.