Lanier 2712 Copier User Manual


 
Basics
26
1
Non-recommended Paper
R
CAUTION:
Important
Donotuseanyofthefollowingkindsofpaperorafaultmightoccur.
Thermal fax paper
Art paper
Aluminum foil
Carbon paper
Conductive paper
OHP transparencies for color copying
Paper with perforated lines
Hemmed paper
Do not copy on the side of paper that has been already copied on or a fault
might occur.
Note
Do not use the following kinds of paper or a misfeed might occur.
Bent, folded, or creased paper
Torn paper
Slippery paper
Perforated paper
Rough paper
Thin paper that has low stiffness
Paper with a lot of paper dust on its surface
If you make a copy on rough grain paper, the copy image might be blurred.
Do not use paper that has been already copied or printed on or a fault might occur.
Paper Storage
Note
When storing paper, the following precautions should always be followed:
Do not store paper where it will be exposed to direct sunlight.
Avoid storing paper in humid areas (humidity: 70% or less).
Store on a flat surface.
Under high temperature and high humidity conditions or low temperature
and low humidity conditions, store paper in a vinyl bag.
Do not use aluminum foil, carbon paper, or similar conductive paper to avoid
a fire or equipment failure.