Lanier 5627 Scanner User Manual


 
Preparations for Use as a Network Scanner
12
2
Initial Scanner Setup
This section explains all required settings and procedures for using the machine
as a network scanner.
Default Settings
Settings to use the functions of the machine as a network scanner are listed be-
low. Make correct setting of necessary items.
Important
Items marked () are the minimum required settings for using the machine
as a network scanner. Be sure to set these items before use.
Items marked () should be set if required.
System settings
For information about the explanation of settings, see the System Settings
manual.
*1
Settings for use as network TWAIN scanner
*2
Settings for use as network delivery scanner
*3
Settings for use as Document Server
*4
Do not change this setting. It must be left at the factory default value.
*5
Make sure that IP address is set.
Settings TWAIN
*1
Delivery
*2
Store
*3
Clock timer settings Scanner Auto Reset Timer ❍❍
Interface settings
[
Network
]
IP Address ✩✩✩
Sub-net Mask ❍❍❍
Gateway Address ❍❍❍
Access Control
Access Mask
Network Boot
Valid Protocol
*4
❍❍❍
Ethernet Speed ❍❍
File transfer settings Delivery Server IP Address
*5
Resend Interval Setting
Resend Frequency Setting