Lanier 5627 Scanner User Manual


 
Initial Scanner Setup
17
2
B
When the original is placed on
the ADF
The maximum scan size is
432mm (17) in the Y direction
(width) and 297mm (11.7) in
the X direction (height). Keep
the scan area settings within
this range.
E
When all dimensions have been
entered, press [OK].
F
Verify that the area set in step
D
(X3 and Y3) is shown next to the
[Custom size] field, then press [OK].
G
Press [Exit].
The User Tools/Counter/Inquiry
screen is shown.
H
Press [Exit].
The main menu is shown again.
Deleting programmed scan settings
A
Press the
{
User Tools/Counter/Inquiry
}
key.
The User Tools/Counter/Inquiry
screen appears.
B
Press [Scanner Features].
The Scanner Features screen ap-
pears.
C
Verify that the [Basic Settings] tab
is shown.
D
Press [Delete].
E
Select the setting you want to de-
lete.
A confirmation message appears.
Start point,
horizontal (Y2)
Scan area
Start point,
vertical (X2
)
Scan area,
vertical (X3
)
Scan area,
horizontal (Y3)
Placement
orientation
Scan
start point
ZEKY040E