Lanier 5627 Scanner User Manual


 
Preparations for Use as a Network Scanner
18
2
F
Press [Yes].
The selected scan setting is delet-
ed.
G
Press [Exit].
The display returns to the Scanner
Features screen.
H
Press [Exit].
The main menu is shown again.
Making Scanner Settings
This section explains how to switch
from network TWAIN scanner mode
to network delivery scanner or Docu-
ment Server mode, and how to set the
compression of image data and initial
values for setting originals.
The scanner settings consist of the fol-
lowing. For the list about settings and
factory defaults, see p.13 Scanner
settings.
Function Priority
Select "Delivery/Store" or
"TWAIN" to determine whether
the network TWAIN scanner
mode, network delivery scanner
mode, or Document Server mode
is initially active when the scanner
function is selected by pressing the
{Scanner} key on the control panel.
Note
When "TWAIN" is selected, the
network TWAIN scanner mode
is set. By pressing [Cancel] in
this condition, you can switch to
network delivery scanner oper-
ation or Document Server oper-
ation.
When "Delivery/Store" is se-
lected, the network delivery
scanner mode or the Document
Server mode is set. It is not pos-
sible to switch network TWAIN
scanner operation from these
modes. To use the machine as a
network TWAIN scanner, ac-
cess the machine from a client
computer using the TWAIN
driver.
Delivery/Store Connection Time out
When using the machine as a net-
work delivery scanner or Docu-
ment Server, scanning request to
the machine as a TWAIN scanner
will switch the machine to the net-
work TWAIN scanner mode. This
setting determines the delay until
the machine switches to network
TWAIN scanner mode.
Selecting "Immediate" causes
the network TWAIN scanner
mode to be activated at once.
When you select "Yes", you can
enter the delay time with the
number keys (3 - 30 seconds).
When the TWAIN scanner
mode is activated, only the time
specified here passes from the
last key operation.