Lanier LD245 Copier User Manual


 
User Tools (Copier/Document Server Features)
96
4
When selecting [User Enlrg. Ra-
tio], enter a ratio using the
number keys (from 101 to
400%).
Priority Setting: Enlarge
You can set the ratio with priority
when [Reduce / Enlarge] is pressed,
followed by [Enlarge].
Note
Default:
•Metric version: 141%
Inch version: 155%
Reproduction Ratio P.
2
/
2
Reduce 1-6
You can customize available re-
duction ratios by pressing [Reduce /
Enlarge] followed by [Reduce].
Note
Default:
•Metric version:
Reduce 1: 25%
Reduce 2: 50%
Reduce 3: 65%
Reduce 4: 71%
Reduce 5: 75%
Reduce 6: 82%
Inch version:
Reduce 1: 25%
Reduce 2: 50%
Reduce 3: 65%
Reduce 4: 73%
Reduce 5: 78%
Reduce 6: 85%
When selecting [User Redc.Ra-
tio], enter a ratio using the
number keys (from 25 to 99%).
Priority Setting: Reduce
You can set the ratio with priority
when [Reduce / Enlarge] is pressed,
followed by [Reduce].
Note
Default:
Metric version: 71%
Inch version: 73%
Ratio for Create Margin
You can set a Reduce/Enlarge ra-
tio when registering Create Mar-
gin in a shortcut key.
Note
Default: 93%
R/E Priority
Specifies which tab is given priori-
ty on the display panel when [Re-
duce / Enlarge] is pressed.
Note
Default: Reduce
Edit P.
1
/
2
Note
Enter the width of the binding
margin with the number keys as
follows:
Metric version: 0–30 mm (in in-
crements of 1 mm)
Inch version: 0"–1.2" (in incre-
ments of 0.1 inch)
Enter the width of the erased mar-
gin with the number keys as fol-
lows:
Metric version: 2–99 mm (in in-
crements of 1 mm)
Inch version: 0.1"–3.9" (in incre-
ments of 0.1 inch)
Reduce1 Reduce2 Reduce3 Reduce4 Reduce5 Reduce6