Filter
Top Products
Copier Functions
31
2
C Make sure that [Specifd. Ratio] is
highlighted.
D Enter the length of the original
with the number keys, and then
press the [#] key.
Note
❒ You can enter sizes within the
following ranges:
E Enter the length of the copy with
the number keys, and then press
[#].
Note
❒
To change the length after press-
ing
[#], select [Original] or [Copy]
and enter the desired length.
F Press [OK].
G Press [OK].
H Place your originals, and then
press the {Start} key.
Directional Magnification (%)
Copies can be reduced or enlarged at
different reproduction ratios, hori-
zontally and vertically.
1. Horizontal ratio
2. Vertical ratio
Note
❒ You can also select a preset ratio
close to the desired ratio using [Re-
duce] or [Enlarge], then adjust with
[n] or [o].
A Press [Reduce / Enlarge].
B Press [Specifd. Ratio].
C Press [Direct. Mag.%].
To enter the ratio with the number
keys
A Press [Horizontal].
B Enter the desired ratio with the
number keys, followed by [#].
C Press [Vertical].
Metric
version
1–999 mm
(in increments of 1 mm)
Inch
version
0.1"–99.9"
(in increments of 0.1")
CP2P01EE