Lanier LD245 Copier User Manual


 
Copier Functions
33
2
A Press [Reduce / Enlarge].
B Press [Specifd. Ratio].
C Press [Dir. Size Mag mm].
D Enter the horizontal size of the
original with the number keys,
and then press [#].
E Enter the horizontal size of the
copy with the number keys, and
then press [#].
F Enter the vertical size of the origi-
nal with the number keys, and
then press [#].
G Enter the vertical size of the copy
with the number keys, and then
press [#].
Note
To change a length, press the
key you want to change and en-
ter the new value.
H Press [OK].
I Press [OK].
J Place the originals, and then press
the {Start} key.
Sort
The machine can scan originals into
memory and automatically sort cop-
ies.
Reference
Related initial settings
p.103 “Select Stack Function”
p.103 “Memory Full Auto Scan Re-
start”
p.103 “Rotate Sort: Auto Paper
Continue”
p.92 “Auto Tray Switching”
Sort
Copies are assembled as sets in se-
quential order.
Rotate Sort
Every other copy set is rotated by
90°KL and delivered to the copy
tray.
Note
To use the Rotate Sort function,
two paper trays loaded with
same size and type paper, but in
different orientation (KL), are
required. See “ Paper Type:
Tray 1–4” in “Tray Paper Set-
tings”, General Settings Guide.