Lanier LD245 Copier User Manual


 
Copying
70
2
If you selected (1-1, 1-2,…)
A Press [Change] on the right side.
B Press [First Printing Page], enter the
original sheet number from
which to start printing, and then
press the {#} key.
Note
To change the number entered,
press [Clear] or the {Clear/Stop}
key, and then enter a new
number.
C Press [First Chapter No.], enter the
chapter number from which to
start numbering with the number
keys, and then press the {#} key.
Note
You can enter between 1 and
9999 for the chapter number
from which to start numbering.
D Press [Numbering from / to], enter
the page number from which to
start printing with the number
keys, and then press the {#} key.
E Press [OK].
F When page designation is com-
plete, press [OK].
Covers
Using this function, you can create
cover sheets by adding additional
pages of different paper or copying
existing pages on different paper.
Preparation
Before selecting this function, set
the tray for the front cover paper.
See “Cover Sheet Tray”in “Tray
Paper Settings”, General Settings
Guide.
Note
The cover sheet should be the same
size and orientation as the copy pa-
per.
You cannot place the copy paper in
the bypass tray.
When selecting
[
Copy
]
, select wheth-
er
the front and back covers are
copied one-sided or two-sided. See
“Cover Sheet Tray”in “Tray Paper
Settings”, General Settings Guide.
Front cover
The first page of your originals is
copied on specific paper sheet for
covers, or a cover sheet is inserted
before the first copy.
•Copy
•Blank