Filter
Top Products
User Tools (Copier/Document Server Features)
92
4
General Features
2
/
4
❖
❖❖
❖ Duplex Mode Priority
You can select the type of Duplex
function effective when the ma-
chine is turned on, reset, or modes
are cleared.
Note
❒ Default: Text: Normal, Text/Pho-
to: Normal, Photo: Normal, Pale:
Normal, Generation Copy: Normal
❖
❖❖
❖ Copy Orientation in Duplex Mode
You can set the copy orientation
when making two-sided copies.
Note
❒ Default: Top to Top
❖
❖❖
❖ Original Orientation in Duplex Mode
You can set the original orientation
when making two-sided copies.
Note
❒ Default: Top to Top
❖
❖❖
❖ Change Initial Mode
You can select initial mode or Pro-
gram No. 10 as the mode effective
when the machine is turned on, re-
set, or modes are cleared.
Note
❒ Default: Standard
❖
❖❖
❖ Max. Copy Quantity
The maximum copy quantity can
be set between 1 and 999.
Note
❒ Default: 999 Sheets.
❖
❖❖
❖ Tone: Original remains
The beeper (key tone) sounds if
you forget to remove originals af-
ter copying.
Note
❒ Default: On
❒ If Panel Tone of User Tools (Sys-
tem Settings) is [Off], the beeper
does not sound irrespective of
the Tone: Original remains set-
ting. See "Panel Tone" in “Gen-
eral Features”, General Settings
Guide.
❖
❖❖
❖ Job End Call
You can choose whether or not the
beeper sounds when copying is
complete.
Note
❒ Default: On
❒ If Panel Tone of User Tools (Sys-
tem Settings) settings is [On],
the machine beeps to notify you
that it did not complete a job for
reasons such as copying was in-
terrupted, the paper tray ran
out of paper, or a paper jam oc-
curred.
AdonisC3_GBcopyF_FM1.book Page 92 Thursday, November 28, 2002 1:53 PM