Filter
Top Products
3: Getting Started
Table 3-1. Current Configuration
Setting
Description
Name Configurable field. A name that identifies the UDS2100.
Double-click the field, type in the value, and press Enter to
complete. This name is not visible on other PCs or laptops
using DeviceInstaller.
Group Configurable field. A group name to categorize the UDS2100.
Double-click the field, type in the value, and press Enter to
complete. This group name is not visible on other PCs or
laptops using DeviceInstaller.
Comments Configurable field. Information about the UDS2100. Double-
click the field, type in the value, and press Enter to complete.
This description or comment is not visible on other PCs or
laptops using DeviceInstaller.
Device Family Displays the UDS2100’s device family as UDS.
Type Displays the device type as UDS2100.
ID Displays the UDS2100’s ID embedded within the box.
Hardware Address Displays the UDS2100’s hardware (or MAC) address.
Firmware Version Displays the firmware currently installed on the UDS2100.
Extended Firmware
Version
Displays the full version nomenclature of the firmware.
Online Status Displays the UDS2100’s status as online, offline, unreachable
(the UDS2100 is on a different subnet), or busy (the UDS2100
is currently performing a task).
IP Address Non-configurable field. Displays the UDS2100’s current IP
address. To change the IP address, see
Assigning an IP
Address
on page 16.
IP Address was Obtained Non-configurable field. Indicates whether the current IP
address on the UDS2100 was set manually or assigned by
DHCP.
Subnet Mask Non-configurable field. Displays the UDS2100’s current
subnet mask. To change the subnet mask, see
Assigning an
IP Address
on page 16.
Gateway Non-configurable field. Displays the UDS2100’s current
gateway. To change the gateway, see
Assigning an IP
Address
on page 16.
Number of COB partitions
supported
Non-configurable field. Displays the number of COB partitions
supported.
Number of Ports Non-configurable field. Displays the number of ports on the
UDS2100.
TCP Keepalive Non-configurable field. Displays the UDS2100’s TCP
keepalive value. The value is in the range 1-65s, and the
default setting is 45.
Telnet Enabled Non-configurable field. Permits Telnet sessions.
UDS2100 User Guide 18