Filter
Top Products
4: Configuration Using Web Manager
Figure 4-2. Network Settings
Automatic IP Address Configuration
An IP address can be assigned automatically. You then enter related network
settings.
Note: Network Mode is Wired Only.
To assign an IP address automatically:
1. On the main menu, click Network.
2. Select Obtain IP address automatically.
3. Enter the following (as necessary):
BOOTP
Select Enable to permit the Bootstrap Protocol (BOOTP)
server to assign the IP address from a pool of addresses
automatically. Enable is the default.
DHCP
Select Enable to permit the Dynamic Host Configuration
Protocol (DHCP) to assign a leased IP address to the
UDS2100 User Guide 23