Filter
Top Products
4: Configuration Using Web Manager
Figure 4-6. TCP Connection Settings
2. In the available fields, enter or modify the following information:
Connect Protocol
Protocol From the drop-down menu, select TCP.
Connect Mode: Passive Connection
Accept Incoming
Select Yes to accept incoming connections. The default
setting is Yes.
Password Required Determines whether a password is required for an incoming
passive connection. This field is not available when a
password is set for Telnet mode. The default setting is No.
Password
If Password Required was set to Yes, enter the password for
passive connections.
Modem Escape Sequence
Pass Through
Disable or enable the unit's ability to send the escape
sequence. The default is Y (Yes) (send the escape
UDS2100 User Guide 31