Filter
Top Products
10: Monitor Mode
Table 10-1. Monitor Mode Commands
Command Command Name Function
VS x.x.x.x Version Queries software header record (16 bytes) of unit with
IP address x.x.x.x.
GC x.x.x.x Get Configuration Gets configuration of unit with IP address x.x.x.x as hex
records (120 bytes).
SC x.x.x.x Send Configuration Sets configuration of unit with IP address x.x.x.x from
hex records.
PI x.x.x.x Ping Pings unit with IP address x.x.x.x to check device
status.
AT ARP Table Shows the unit’s ARP table entries.
TT TCP Connection
Table
Shows all incoming and outgoing TCP connections.
NC Network Connection Shows the unit’s current IP address, gateway, subnet
mask, and DNS server.
RS Reset Resets the unit’s power.
QU Quit Exits diagnostics mode.
G0, G1, ....,Ge, Gf Get configuration
from memory page
Gets a memory page of configuration information from
the device.
S0, S1,...,Se, Sf Set configuration to
memory page
Sets a memory page of configuration information on the
device.
GM Get MAC address Shows the unit's 6-byte MAC address.
SS Set Security record Sets the Security record without the encryption key and
length parameters. The entire record must still be
written, but the encryption-specific bytes do not need to
be provided (they can be null since they are not
overwritten).
SA Scan Initiates a wireless scan if the wireless interface is
enabled. Reports any stations found, including BSSID,
SSID, and RSSI. If SA is followed by a string, the string
is used to filter SSIDs before reporting. If the BSS does
not broadcast its SSID, only the BSSID and RSSI are
returned.
NS Network Status Reports the network interfaces’ statuses. Includes
potentially negotiated parameters like speed/duplex for
Ethernet or BSSID, encryption, authentication for
wireless interfaces.
co Set IP address, host
bits, gateway, and
DNS server IP
Example:
co 192.168.0.10 8 192.168.0.1 10001 192.168.1.10
with
192.168.0.10 = IP address of the UDS
8 = number of host bits
192.168.0.1 = gateway IP address
10001 = port number of the UDS
192.168.1.10 = IP address of the DNS Server
UDS2100 User Guide 65