Filter
Top Products
5. After installing the monitor stand, pull up the computer to the vertical position and remove the monitor
stand lock to adjust the height of the monitor stand. The monitor stand has a height adjustment range of
110 millimeters (4.33 inches).
Figure13. Removing the monitor stand lock
6. If needed, open the cable manager and route the cables connected to the computer through the cable
manager to keep your workspace neat.
What to do next:
• To work with another piece of hardware, go to the appropriate section.
• To complete the installation or replacement, go to “Completing the parts replacement” on page 71
.
Removing the computer cover
Attention:
Do not open your computer or attempt any repair before reading and understanding “Important safety information”
on page v.
This section provides instructions on how to remove the computer cover.
CAUTION:
Turn off the computer and wait three to five minutes to let the computer cool before removing the
computer cover.
To remove the computer cover, do the following:
1. Remove any media from the drives and turn off all attached devices and the computer.
2. Disconnect all power cords from electrical outlets.
42 ThinkCentre M93z User Guide