6. Insert the ThinkPad Serial Hard Drive Bay Adapter III into the Serial Ultrabay Enhanced bay.
Install a secondary hard disk drive through the ThinkPad 12.7 mm Serial ATA Hard Drive Bay Adapter III
To install a secondary hard disk drive through the ThinkPad 12.7 mm Serial ATA Hard Drive Bay Adapter III,
do the following:
Attention: Replace a hard disk drive only if you are upgrading it or having it repaired. Frequent replacement
of the hard disk drive might damage the drive and bay.
1. Remove the Serial Ultrabay Slim device or Serial Ultrabay Enhanced device from your computer. See
“Replacing the Ultrabay device” on page 71.
2. Open the hard disk drive stopper on the ThinkPad 12.7 mm Serial ATA Hard Drive Bay Adapter III.
3. Lift up the cover lm and insert the hard disk drive with the label facing upward.
98 User Guide