Filter
Top Products
Table 25. Submenus under the USB Configuration (continued)
Item Option Description
Emulation Type [Auto]
Floppy
Forced FDD
Hard Disk
CDROM
Select the type of the USB
device.
Table 26. Submenus under the Hardware Health Configuration
Item Option Description
Items and options with BMC configuration:
Auto Fan Control Disabled
[Enabled]
If this option is set to
Disabled, the fan runs at the
full speed; if this option is
set to Enabled, the fan speed
is controlled by the system
temperature.
PWM Minimal Duty Cycle [60% Duty Cycle]
45% Duty Cycle
30% Duty Cycle
Select the PWM Minimal
Duty Cycle for the fan:
60%-100%, 45%-100%, or
30%-100%.
Sensor Data Register
Monitoring
Read Only The sensor data in this
option is for read only. The
detected data includes the
temperature, voltage and fan
speed.
Items and options without BMC configuration:
H/W Health Function Disabled
[Enabled]
Enable or disable the
hardware monitor function.
Auto FAN Control Disabled
[Enabled]
If this option is set to
Disabled, the fan runs at the
full speed; if this option is
set to Enabled, the fan speed
is controlled by the system
temperature.
PWM Minimal Duty Cycle [60% Duty Cycle]
45% Duty Cycle
30% Duty Cycle
Select the PWM Minimal
Duty Cycle for the fan:
60%-100%, 45%-100%, or
30%-100%.
Fan Failure LED Indication Disabled
[Enabled]
Enable or disable the fan
alarm function. If this option
is set to Enabled, a message
about fan failure will be
displayed on the POST
screen when the rotational
speed of each fan is less than
800 rpm.
Hardware Health Event
Monitoring
Read Only The sensor data in this
option is for read only. The
detected data includes the
temperature and system fan
rotational speed.
Note: The settings in[]arethedefault settings in the Setup Utility program.
108 ThinkServer RD230 Types 1043, 1044, 4010, and 4011: Hardware Maintenance Manual