Filter
Top Products
Table 27. Submenus under the IPMI 2.0 Configuration
Item Sub-item Option Description
View BMC System
Event Log
View the system
event log.
Clear BMC System
Event Log
Delete the system
event log.
Set LAN
Configuration
Set the IP address
source, IP address,
subnet mask, and
gateway address.
Set PEF
Configuration
PEF SUPPORT Disabled
[Enabled]
Enable or disable the
PEF support.
BMC Watch Dog
Timer Action
[Disabled]
Reset System
Power Down
Power Cycle
Disable or enable the
OS based dongle. If
enabled, whenever
any problems arising
from the operation
system, such as the
system halted, the
system management
feature will take
actions of Reset
System, Power
Down, or Power
Cycle at the prompt
of the dongle Timer.
BMC Alert LED and
Beep
[Off]
On
Turn on or turn off
the BMC alert LED
and beep.
FW key [0000000]
Note: The settings in[]arethedefault settings in the Setup Utility program.
Table 28. Submenu under the Intel VT-d Configuration
Item Option Description
Intel VT-d Disabled
[Enabled]
Enable or disable the
virtualization technology for
I/O devices.
Note: The settings in[]arethedefault settings in the Setup Utility program.
Table 29. Submenus under the Remote Access Configuration
Item Option Description
Remote Access [Disabled]
Enabled
Enable or disable the serial
port remote access.
Note: The settings in[]arethedefault settings in the Setup Utility program.
Table 30. Items under the PCIPnP menu
Item Option Description
Clear NVRAM [No]
Yes
If this option is set to Yes,
that means to clear the
NVRAM information when
the system starts up.
Chapter 7. Configuring the server 109