Filter
Top Products
This section provides instructions on how to remove the riser card with a PCI card
installed.
To remove the riser card, do the following:
Note: Use any documentation that comes with the riser card and follow those
instructions in addition to the instructions in this section.
1. Remove all media from the drives and turn off all attached devices and the
server. Then, disconnect all power cords from electrical outlets and disconnect
all cables that are connected to the server.
2. Remove the server cover. See “Removing the server cover” on page 42.
3. Disconnect any cables from the PCI card or any cables that impede access to
the riser card.
4. Open the retention tab that secures the PCI card, which is installed on the riser
card.
Figure 22. Opening the retention tab
58 ThinkServer RD230 Types 1043, 1044, 4010, and 4011: Hardware Maintenance Manual