Filter
Top Products
5. Press the riser card (might having a PCI card installed) down into the
appropriate PCI card slot on the system board. Then, close the retention tab to
secure the PCI card (installed on the riser card) and then install the fastening
screw to secure the riser card in place.
Note: The riser card might have a PCI card already installed on it. Carefully fit
the PCI card into the server.
6. To complete the installation, go to “Completing the parts replacement” on page
87.
Removing the riser card
Attention
Do not open your server or attempt any repair before reading and understanding the Safety
Information and the Warranty and Support Information on the ThinkServer Documentation DVD
that comes with your product, and “Guidelines” on page 37. To obtain a copy of the
publications, go to:
http://www.lenovo.com/support
Figure 21. Installing the riser card
Chapter 5. Installing, removing, or replacing hardware 57