Lenovo TS140 Network Router User Manual


 
Figure4. Rear connector locations
1 Power cord connector 9 Audio line-in connector
2 Serial connector 10 PCI Express x16 graphics card (available in some models)
3 VGA monitor connector 11 PCI Express x1 card slot bracket
4 DisplayPort connectors (2) 12 PCI card slot bracket
5 USB 3.0 connectors (4) 13 PCI Express x4 card slot bracket
6 USB 2.0 connectors (2) 14 Optional serial connector
7 Microphone connector 15 Ethernet connector
8 Audio line-out connector
16 PS/2 keyboard and mouse connectors (optional)
Connector Description
Audio line-in connector
Used to receive audio signals from an external audio device, such as a stereo
system. When you attach an external audio device, a cable connects the audio
line-out connector of the device to the audio line-in connector of the server.
Audio line-out connector
Used to send audio signals from the server to external devices, such as powered
stereo speakers (speakers with built-in ampliers), headphones, multimedia
keyboards, or the audio line-in connector on a stereo system or other external
recording device.
DisplayPort connector
Used to attach a high-performance monitor, a direct-drive monitor, or other devices
that use a DisplayPort connector.
Ethernet connector
Used to attach an Ethernet cable for a local area network (LAN).
Note: To operate the server within FCC Class B limits, use a Category 5 Ethernet
cable.
Microphone connector
Used to attach a microphone to your server when you want to record sound or if
you use speech-recognition software.
Serial connector
Used to attach an external modem, a serial printer, or other devices that use a
9-pin serial connector.
14 ThinkServer TS140 User Guide