Filter
Top Products
5. Pull the blue handle to release and remove the hard disk drive from the drive cage.
Figure47. Removing the primary hard disk drive
6. Flex the sides of the blue bracket to remove the hard disk drive from the bracket.
7. To install a new hard disk drive into the blue bracket, ex the sides of the bracket and align pin 1 , pin 2 ,
pin 3 , and pin 4 on the bracket with the corresponding holes in the hard disk drive. Do not touch the
circuit board 5 on the bottom of the hard disk drive.
Figure48. Installing the hard disk drive into the bracket
8. Slide the new hard disk drive into the drive cage until it snaps into position.
Chapter 6. Installing, removing, or replacing hardware 65