Filter
Top Products
Setup Utility program interface
This topic provides general information about the menus and items in the Setup Utility program.
Depending on the BIOS version of your server, some menu or item information might differ slightly from
the information in this topic.
Notes:
• The default settings already are optimized for you. Use the default value for any item you are not familiar
with. Do not change the value of unfamiliar items to avoid unexpected problems. If you consider changing
the server conguration, proceed with extreme caution. Setting the conguration incorrectly might cause
unexpected results. If you cannot turn on the server because of incorrect BIOS settings, use the Clear
CMOS jumper to restore the BIOS settings to the factory default settings. See “Locating parts on the
system board” on page 15
.
• If you have changed any hardware in the server, you might need to reash the BIOS.
The Setup Utility program main interface consists of the following menus:
• “Main menu” on page 22
• “Devices menu” on page 22
• “Advanced menu” on page 23
• “Power menu” on page 24
• “Security menu” on page 23
• “Startup menu” on page 24
• “Exit menu” on page 24
Lenovo provides the BIOS update utility on the Lenovo Support Web site. You can download the BIOS
update utility to update the BIOS if the newer BIOS version specically solves a problem you have. See
“Updating or recovering the BIOS” on page 27
.
If the power to your server is interrupted while the BIOS is being updated and your server cannot start
correctly, use the BIOS recovery switch to recover from a BIOS update failure. See “Recovering from a
BIOS update failure” on page 28.
Main menu
After entering the Setup Utility program, you can see the Main menu, which lists basic information about
the BIOS and BMC, total memory size, and system date and time.
To set the system date and time on the Main menu, see “Setting the system date and time” on page 24.
Devices menu
You can view or change various device settings on the Devices menu in the Setup Utility program. On each
submenu, press Enter to view the information or show selectable options and select a desired option by
using the up and down arrow keys. Some items are displayed on the menu only if the server supports the
corresponding features.
The Devices menu contains the following submenus. For more information, enter the corresponding
submenu and refer to the instructions on the screen.
• Serial Port Setup: View and set serial port conguration parameters.
• USB Setup: View and set USB conguration parameters.
• ATA Drive Setup: View and set SATA hard disk drive conguration parameters.
22 ThinkServer TS140 User Guide