Filter
Top Products
4. Install the hard disk drive into the 5.25-inch to 3.5-inch drive conversion bracket. Then, install the four
screws to secure the hard disk drive in the bracket.
Note: You can obtain a 5.25-inch to 3.5-inch drive conversion bracket from a local computer retailer
or by contacting the Customer Support Center.
Figure15. Installing the hard disk drive into the drive conversion bracket
5. Install the retainer on the side of the bracket.
Figure16. Installing the retainer on the side of the bracket
6. If there is a metal static shield installed in the secondary optical drive bay, remove the metal static shield.
46 ThinkServer TS140 User Guide