Filter
Top Products
44
VLAN Menu: VLAN Port Configuration
=========
GARP Configuration
Join Time 20 Centiseconds
Leave Time 60 Centiseconds
Leave All Time 1000 Centiseconds
VLAN and Priority
Port VID 1
Port Default Priority 0
VLAN Tagging Rx All, Tx All
GVRP ENABLED
GMRP ENABLED
Ingress Filtering DISABLED
Port 1 <Apply> <OK> <Cancel> <Prev Port> <Next
Port>
The join time for the port.
| READ/WRITE
Use <TAB> or arrow keys to move, other keys to make changes.
Parameter Default Description
GARP¹ Group Address Registration Protocol is used by GVRP and
GMRP to register or deregister client attributes for client
services within a bridged LAN.
Join Time 20 The interval (centiseconds) between transmitting requests /
queries to participate in a group.
Leave
Time
60 The interval (centiseconds) a port waits before leaving a group.
This time should be set to more than twice the Join Time. This
ensures that after a Leave or LeaveAll message has been
issued, the applicants can re-join before the port actually leaves
the group.
Leave All
Time
1000 The interval (centiseconds) between sending out a LeaveAll
query message for group participants and the port leaving the
group.
This interval should be considerably larger than the Leave Time
to minimize the amount of traffic generated by nodes rejoining
the group.
VLAN and
Priority
These fields set the default values for VLANs, port priority,
GVRP and GMRP.
Port VID 1 The VLAN ID assigned to untagged frames received on this
port.