Filter
Top Products
Ordering staple cartridges
Part name Part number
Staple cartridges 25A0013
Ordering a roller kit
For more information on replacing the roller kit, see the instruction sheet that came with the part.
Lexmark roller kit and part number
Type Part number
Printer engine roller maintenance kit 40X7706
Ordering a maintenance kit
To identify the supported fuser type, view the label on the fuser. Do either of the following:
• Remove the toner cartridge and the imaging unit. The two-digit fuser type code (such as 00 or 01) can be seen on
the front of the fuser.
Warning—Potential Damage: Do not expose the imaging unit to direct light for more than 10 minutes.
Extended exposure to light may cause print quality problems.
• Pull down the printer rear door. The two-digit fuser type code (such as 00 or 01) can be seen on the rear of the
fuser.
Notes:
• Using certain types of paper may require more frequent replacement of the maintenance kit.
• The separator roller, fuser, pick roller assembly, and transfer roller are all included in the maintenance kit and
can be individually ordered and replaced if necessary.
• For more information on replacing the maintenance kit, see the instruction sheet that came with the supply.
Lexmark Return Program fuser maintenance kits and part numbers for MS810, MS811, and MS812
Fuser maintenance kit type Part number
Type 00 40X8420
Type 01 40X8421
Type 02 40X8422
Type 03 40X8423
Type 04 40X8424
Lexmark regular fuser maintenance kits and part numbers for MS810, MS811, and MS812
Fuser maintenance kit type Part number
Type 05 40X8425
Type 06 40X8426
Maintaining the printer 259