Lexmark 40G0410 Printer User Manual


 
To clear the message and resume the job, select Continue on the printer control panel. For non-touch-screen printer
models, press
to confirm.
Close door or insert cartridge
The toner cartridge is missing or not installed properly. Insert the cartridge, and then close all doors and covers.
Close front door
Close the front door of the printer.
Complex page, some data may not have printed [39]
Try one or more of the following:
From the printer control panel, select Continue to ignore the message and continue printing. For nontouchscreen
printer models, press
to confirm.
Cancel the current print job. For nontouchscreen printer models, press to confirm.
Install additional printer memory.
Configuration change, some held jobs were not restored [57]
Held jobs are invalidated because of any of the following possible changes in the printer:
The printer firmware has been updated.
The tray for the print job is removed.
The print job is sent from a flash drive that is no longer attached to the USB port.
The printer hard disk contains print jobs that were stored when the hard disk was installed in a different printer
model.
From the printer control panel, select Continue to clear the message. For non-touch-screen printer models, press
to confirm.
Defective flash detected [51]
Try one or more of the following:
Replace the defective flash memory card.
From the printer control panel, select Continue to ignore the message and continue printing. For nontouchscreen
printer models, press
to confirm.
Cancel the current print job.
Troubleshooting 294