Lexmark 652dn Printer User Manual


 
Network/Ports Standard Network or Network <x> Std Network Setup or Net <x> Setup Reports or
Network Reports
Menu item Description
Print Setup Page
Print NetWare Setup Page
Prints a report containing information about the current network setup
Notes:
The Setup Page contains information about the network printer settings,
such as the TCP/IP address.
The NetWare Setup Page menu item appears only on models that support
NetWare and shows information about NetWare settings.
Network Card menu
This menu is available from the Network/Ports menu:
Network/Ports Standard Network or Network <x> Std Network Setup or Net <x> Setup Network Card
Menu item Description
View Card Status
Connected
Disconnected
Lets you view the connection status of the Network Card
View Card Speed
Lets you view the speed of a currently active network card
Network Address
UAA
LAA
Lets you view the network addresses
Job Timeout
0-225 seconds
Sets the amount of time in seconds that a network print job can take before
it is canceled
Notes:
90 seconds is the factory default setting.
A setting value of 0 disables the timeout.
If a value of 1–9 is selected, then the setting is saved as 10.
Banner Page
Off
On
Allows the printer to print a banner page
Note: Off is the factory default setting.
TCP/IP menu
Use the following menu items to view or set the TCP/IP information.
Note: This menu is available only for network models or printers attached to print servers.
This menu is available from the Network/Ports menu:
Understanding printer menus
112