Filter
Top Products
Paper menu
Default Source menu
Menu item Description
Default Source
Tray <x>
MP Feeder
Envelope Feeder
Manual Paper
Manual Env
Sets a default paper source for all print jobs
Notes:
• Tray 1 (standard tray) is the factory default setting.
• Only an installed paper source will appear as a menu setting.
• A paper source selected by a print job will override the Default Source
setting for the duration of the print job.
• If the same size and type of paper are in two trays and the Paper Size
and Paper Type settings match, then the trays are automatically
linked. When one tray is empty, the job prints using the linked tray.
• From the Paper menu, Configure MP must be set to Cassette in order
for MP Feeder to appear as a menu setting.
Paper Size/Type menu
Menu item Description
Tray <x> Size
A4
A5
A6
JIS B5
Letter
Legal
Executive
1
Oficio
1
Folio
Statement
1
Universal
Specifies the paper size loaded in each tray
Notes:
• A4 is the international factory default setting. Letter is the US factory
default setting.
• For trays with automatic size sensing, only the size detected by the
hardware appears.
• Use this menu item to configure automatic tray linking. If the same
size and type of paper are in two trays and the Paper Size and Paper
Type settings match, then the trays are automatically linked. When
one tray is empty, the job prints using the linked tray.
• Automatic size sensing is not supported for Oficio, Folio, or
Statement paper sizes.
• The 2000-sheet tray supports A4, Letter, and Legal paper sizes.
1
Appears only if Tray Size Sensing is turned off.
Note: Only installed trays, drawers, and feeders are listed in this menu.
Understanding printer menus
96